- Minimum Order Quantity :
- Unit of Measure :
- Price :
- 395000 INR
42 MM DOUBLE COLUMN TYPE Radial Arm Drilling Machine
|No||Description||DC - 410|
|Capacity||Drilling In Mild Steel||42 ( 1 5/8")|
| ||Drilling in Cast Iron||50|
| ||Rough Boring in Mild Steel||60|
| ||Tapping in Mild Steel||25|
|Drilling Head||Spindle Taper||MT-4|
| ||Spindle Travel||225|
| ||Spindle Speed (RPM x Steps)|| |
70, 125, 180, 245, 290, 325, 380, 490, 650, 800, 1100, 1520
| ||Diameter of RAM (Quill)||78|
| ||No. of Spindle Auto feed Ranges (MM/REV)||4 steps |
0.06, 0.12, 0.20, 0.30
|Working Range||Max / Min Distance Spindle Nose to Base||1135 / 395|
| ||Vertical Travel of Arm||740|
| ||Max / Min Distance Spindle Center to Column||1020 / 275|
| ||Horizontal Travel of Arm||745|
| ||Max Drilling Radius||1133|
| ||Machine Measurement (LxBxH)||1600 x 850 x 2190|
| ||Diameter of Column||225|
| ||Work Table||500 x 450 x 400|
| ||Coolant Tank||770 x 430 x 145 |
|Power||Drill Head Motor||2 HP(1.5 KW) 960 RPM (Single Speed Motor)|
| ||Elevating Motor||1 HP(0.75 KW) 960 RPM|
Specification of Machine :
- Left hand operation with ergonomic world class design.
- Independent locking of Drill Head With Arm, Arm With Sleeve And Sleeve With Column for easy setting.
- Use of high grade - fine grain materials and precision manufacturing guarantee long life of machine.
- Easily accessible front panel arrangement of electrical and mechanical controls.
- More Wider base for working area.
- Coolant tank of 50 liters.
- Rigid box type construction.
- More Wider Base for better work piece grip.
LIFTING NUT :
- 4 " long Lifting screw nut made up of brass.
COLUMN ASSEMBLY :
- Double column type structure with Dia 225 MM and INSIDE RIBS for more rigidity and smooth movement.
- Arm and Column rigidly built with reinforcement ribs to reduce distortion, to give high capacity and lasting accuracy.
- Completely Oil bath gear box with 12 spindle speed steps with near geometric progression for the optimum use of machine.
- All gears gearbox are made up of NiCr Steel with hardness of 50-55 HRC with thickness of 15 mm.
SHAFTS OF GEARS :
- All shafts made of NiCr alloy steel with hardness 55 HRC.
- All Four splines and six splines of shafts are GROUND on Spilne Grinding Machine.
- Spildle & spindle ram(Quill) are made up OF NiCr Steel WITH FINAL HARDNESS OF 55 HRC
- Spindle is designed with 4 Nos of Bearing with Taper, Thrust and Ball Bearings.
- Bearing sizes are internal ground.
- Pinion supported through bearings.
RAM LINER BUSH :
- Head stock is provided with HIGH GRADE CAST IRON LINER BUSH like in automobile engines for easy sliding movement of RAM and very long life. Also it ensures interchangeability when replacing after wear out.
AUTO FEED SYSTEM :
- 4 auto feed near geometric progression for all processes to be done like drilling, reaming, boring, etc.
- Overload Safety Clutch System for tool protection and machine protection.
- Spindle auto-stop with travel adjustment
Plot No. D-15/16, Almighty Gate, Road C, GIDC Lodhika, Vill: Metoda, Rajkot, Gujarat, 360021, India